Sep 17, 2011 - What does it say in the manual? If you've lost it get a new one online - search for. 'mastercraft juicer manual' this will give you a number of hits.
• Digital Multimeter 52-0052-2 INSTRUCTION MANUAL WARNING: READ AND UNDERSTAND THIS MANUAL BEFORE USING YOUR MULTIMETER. FAILURE TO UNDERSTAND AND COMPLY WITH WARNINGS AND OPERATING INSTRUCTIONS CAN RESULT IN SERIOUS OR FATAL INJURIES AND/OR PROPERTY DAMAGE. MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8. • 52-0052-2 HOLD Mastercraft / /½/ AC/ DC Data Hold Range Relative Backlight Hz/% NPN PNP AUTO POWER OFF AC/DC µ A AUTO-RANGING SELECTION AUTOMATIQUE V/½/F/ CAT II F US E D 100 0V DC 400m A 750V AC µ A/mA. • Before operating your multimeter, become familiar with each control. A clear understanding of how your multimeter works will help to avoid mistakes and minimize measurement errors, instrument damage and the possibility of injury. SAFETY INSTRUCTIONS This meter has been designed for safe use, depending on UL61010-1, but must be operated with caution.
Common Jack Plug-in connection for black (negative) test lead. V/ F / / /CAP Jack Ω Ω Ω Ω Plug-in connection for red (positive) test lead for all voltage, capacitance, frequency, resistance and continuity measurements, and diode checks. Data Hold & Backlight Button Use to hold a reading. When this button is pressed, the data being displayed will be frozen on the LCD and 'HOLD' will appear. Changes in the input signals will not change the display. It can be used in all measurements modes.
Press the button again to release this function and the 'HOLD'. • Specifications: General Display: 3 3/4 digit LCD Maximum read: 4000 with automatic polarity display (no sign for positive polarity) Measuring method: A/D converter Sampling speed: 3 times/sec. Maximum common mode voltage: 500 V AC/DC Backlight for easy reading Auto shut-off switch: multimeter will be shut off after 30 minutes from last use Low battery indication: the battery symbol is displayed if battery voltage drops below operating voltage Operating environment: 5 35˚C, humidity.
My 52-0060-2 Mastercraft Digital Multimeter will not record Resistance. I accidentally but the two leads across 120 vac while it was set to the Resistance scale. When set to 2000k ohm it shows all zeros, 200k it shows 00.7 and strike the two leads together it will show 00.0, 20k it shows 0.71 and strike the two leads will show 0.00, 2000 scale shows 722 and goes to 000 when the two leads touch. Arma 3 altis life map download 2017.
200 scale reads 78.3 and drops to 00.3 when the two leads touch. The diode scale reads 297 and drops to 000 when the two leads touch.
All other scales seem to be working OK. Anyone care to diagnose the possible problem this accident may have caused? And why I would be getting these readings on the Resistance scale? __________________ Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!