This data is being extracted with help of the ' software only. It may not applicable for other software titles. Alcatel 4200 E You have to do the following settings using your Alcatel programming software (MMC). If you don't have a cable you'll need to make the wiring directly on the CM board. Connect X7, X8: 10 pin BURNDY connector for connecting a pulse metering device (X7) and the MMC PC (X8). The terminals connected to these interfaces must be classified S.E.L.V.
Connection Type TIM Plus establishes a serial connection with this PBX. Support Files Alcatel 4400E.TDT Required Tasks Configuring your SMDR output The Alcatel 4200-4400e phone system sends its call records via a serial connection. The most recent units already have a.v24 port but, for older units, you may need to purchase a.v24 module. Connect a serial cable between your Alcatel 4200-4400e.v24 module and the PC that is installed and running on.
The EX series Switch, acting as local DHCP server, fails to forward the 'Next Server' IP Address resulting in the Alcatel Lucent IP Touch 4028 Phone failing to. These instructions help you configure your Alcatel 4200-4400e phone system to. Visit Tri-Line's Gateway and download the interface file, as shown below. The serial port and send it to TIM Plus, you first need to install the NetPBX software.
See the table below for a summary of data output from Alcatel 4200-4400e: Download the interface file • Visit and download the interface file, as shown below: • Extract the Alcatel 4400E.ZIP file onto your computer's Desktop. This ZIP file contains the following file: Alcatel 4400E.TDT. • Copy the file into the C: Program Files Tri-Line TIM Plus config folder. Installing NetPBX The Alcatel 4200-4400e phone system sends its call records via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the software. For setup instructions, click on the link below: Configuring TIM Plus Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps: • Click on the Directory tab.
• Choose the site you want to configure and click Properties. • In the Site Properties window, select Alcatel 4400e from the PBX model drop-down list. Gammi dlya fortepiano nikolaev windows 7. • In the Connection method field, select No connection required from the drop-down list. • Click on the Save button to apply the settings.